語言
Magnetron sputtering (磁控濺射台))

新聞資訊

熱門關鍵詞

聯係91guochan

名 稱:蘇州91guochan電子科技有限公司

電 話:0512-58987901

傳 真:0512-58987201

郵 箱:sales@tonertimes.com

地 址:江蘇省張家港經濟開發區複興路2號B06棟1樓215600PRC

網 址:www.tonertimes.com

Name: Suzhou cycas  Microelectronics Co., Ltd.

Tel.: 0512-58987901

Fax: 0512-58987201

Email: sales@tonertimes.com

Address: 1st floor,B06 building,No.2,Fuxing Road,Zhangjiagang Economic Development Zone,Jiangsu Province 215600PRC

Website: www.tonertimes.com 

等離子技術在汽車工業的使用Application of plasma technology in automobiles industry

您的當前位置: 首 頁 >> 新聞資訊 >> 技術知識

等離子技術在汽車工業的使用Application of plasma technology in automobiles industry

發布日期:2019-09-27 作者:www.tonertimes.com 點擊:

      隨著經濟的發展,消費者對汽車的性能要求越來越高,如汽車的外觀、操作舒適性可靠性、使用耐久性等要求也不斷提高。為了滿足消費者的要求,各汽車廠家在生產汽車時更注重細節方麵的優化改進,如進行 


(1)儀表板在柔性聚氨酯(PU)塗覆前處理 

(2)控製麵板在粘合前處理 

(3)內部PP零件植縟前處理 

(4)汽車門窗密封件的處理 

等離子刻蝕機

      以前未經任何處理儀表盤或控製麵板塗覆效果非常差,不耐磨,容易掉漆等現象,用化學方法處理雖然能改變塗覆的效果,但同時也改變了儀表盤等基材的性能,使得其強度有所降低。目前很多廠家已經使用等離子刻蝕機技術來處理這些基材,通過等離子體轟擊,材料表麵微觀層麵活性增強,能明顯改善塗覆效果。根據實驗得知,用等離子表麵處理機處理不同材料需要選用不同工藝參數,才能達到更好的活化效果。

                                        Application of plasma technology in automobiles industry

      With the development of economy, consumers have higher and higher requirements for the performance of the car, such as the appearance of the car, the reliability of operation comfort, the durability of use and so on. In order to meet the requirements of consumers, automobiles manufacturers pay more attention to the optimization and improvement of details in the production of automobiless, such as

(1) pretreatment of instrument panel in flexible polyurethane (PU) coating

(2) pretreatment of control panel in bonding

(3) pretreatment of PP parts in interior

(4) treatment of automobiles door and window seals

     Without any treatment before, the coating effect of instrument panel or control panel is very poor, not wear-resistant, easy to paint off and other phenomena. Although chemical treatment can change the coating effect, it also changes the performance of substrate such as instrument panel, making its strength reduced. At present, many manufacturers have used plasma etching technology to treat these substrates. Through plasma bombardment, the micro layer activity of the material surface is enhanced, which can significantly improve the coating effect. According to the experimental results, it is necessary to select different process parameters for plasma surface treatment of different materials in order to achieve better activation effect. 


本文網址:http://www.tonertimes.com/news/350.html

相關標簽:等離子刻蝕機

Z近瀏覽: