語言
Magnetron sputtering (磁控濺射台))

新聞資訊

熱門關鍵詞

聯係91xjcc下载官网

名 稱:蘇州91guochan電子科技有限公司

電 話:0512-58987901

傳 真:0512-58987201

郵 箱:sales@tonertimes.com

地 址:江蘇省張家港經濟開發區複興路2號B06棟1樓215600PRC

網 址:www.tonertimes.com

Name: Suzhou cycas  Microelectronics Co., Ltd.

Tel.: 0512-58987901

Fax: 0512-58987201

Email: sales@tonertimes.com

Address: 1st floor,B06 building,No.2,Fuxing Road,Zhangjiagang Economic Development Zone,Jiangsu Province 215600PRC

Website: www.tonertimes.com 

蝕刻機腐蝕加工蝕刻網片的工藝流程Process flow of etching mesh by etching machine

您的當前位置: 首 頁 >> 新聞資訊 >> 技術知識

蝕刻機腐蝕加工蝕刻網片的工藝流程Process flow of etching mesh by etching machine

發布日期:2018-12-22 作者:www.tonertimes.com 點擊:

  蝕刻網又稱過濾網,采用金屬薄片通過蝕刻機腐蝕加工而成,我公司是一家專業生產金屬腐蝕機的廠家,91shipin可按照客戶的要求提供全套腐蝕設備和蝕刻工藝技術,蝕刻網片主要作用於生活中的液體分離,常見的產品名稱有茶網、豆網、篩網、喇叭網、花灑片等等統稱為過濾網.

  蝕刻網的介紹:

蝕刻網是使用化學蝕刻液通過蝕刻機高壓噴淋到工件上,讓部分工件與蝕刻液產生化學反應從而減少的過程,想要使一塊金屬片部分區域減少,91guochan就必須在不需要減少的地方做上保護層,此保護層91xjcc下载官网通過曝光顯影的方式做上去。

thumb_20180124145753_236.jpg

  蝕刻網的材質:

Z常見的是不鏽鋼片,其次就是鋁板、銅板和各種合金薄片等等。

  蝕刻網的生產的蝕刻工藝流程:

  透過蝕刻網的特性可以得知,蝕刻網全部都是用化學蝕刻的方法生產加工而成,因為蝕刻網上是很密集的小孔且不允許有毛刺和風批的,而衝壓工藝是做不到這種密集度和平滑度的。蝕刻網的工藝是采用曝光顯影的方式來做圖像轉移的,所以蝕刻網生產加工需要六台設備通過六道工序來生產加工而成的,六台設備分別為:塗布機、烤箱、曝光機、顯影機、蝕刻機、超聲波清洗機。通過這六台設備的性能作用於各自對應工序來實現生產加工。

   Etching screen, also known as filter screen, is made of metal sheet by etching machine. Our company is a professional manufacturer of metal etching machine. We can provide a complete set of corrosion equipment and etching technology according to the requirements of customers, Etched mesh is mainly used for liquid separation in life. Common product names include tea net, bean net, sieve net, horn net, flower sprinkling piece and so on。

  Etching net introduction:

etching net is a process of using chemical etching solution to spray on the workpiece through the high pressure of the etching machine, so that part of the workpiece can react with the etching solution to reduce. If we want to reduce part of the area of a piece of metal sheet, we must make a protective layer where there is no need to reduce. This protective layer is made by the way of exposure development.

  Etching mesh material:

 the most common is stainless steel sheet, followed by aluminum, copper and various alloy sheet and so on.

 Etching process flow of etching mesh production: 

through the characteristics of etching mesh, we can know that etching mesh is all produced and processed by chemical etching method, because the etching mesh is very dense with holes and no burr and wind batch are allowed, and stamping process can not achieve this density and smoothness. The process of etching mesh is to use the method of exposure development to do image transfer, so the production and processing of etching mesh requires six equipment to produce and process through six processes, six equipment are respectively: coater, oven, exposure machine, developer, etching machine, ultrasonic cleaning machine. Through the performance of these six equipments acting on their corresponding processes to achieve production and processing.

本文網址:http://www.tonertimes.com/news/419.html

相關標簽:幹法去膠機

Z近瀏覽: